1. The fixed support should be firm:
According to the experience of Jucaiyuan Optoelectronics, the general glass window is installed by hanging up and down, and the upper and lower hanging beams should be made of high-quality profiles, especially if the window is relatively large, and the transparent screen area is large. Material, toughness must be strong, to ensure the firmness of the transparent screen after installation, and structural safety is the first priority.
There are two main types of wires for transparent screens, one is the power cord; the other is the signal line.
There are two main advantages to using concealed wiring when wiring:
(1) Taking into account safety factors, it is necessary to avoid the danger of electric shock and the danger of affecting the normal use of the screen body if someone accidentally touches it.
(2) Considering the aesthetics after installation.
3. Do a good job of waterproofing measures:
The window LED flexible transparent screen is generally installed indoors for outdoor viewing. The main reason is that this type of transparent screen can meet the conditions for outdoor use in terms of brightness, but not in terms of waterproofing, so it must be installed indoors for outdoor viewing. It is required that our transparent screen cannot have water droplets on the screen body at the installed window position. If there are water droplets on the screen body, it will cause a short circuit of the screen body PCB board or IC, which is fatal to the transparent LED display.
4. Ventilation and cooling conditions:
Many customers have asked whether they need to ventilate the screen or install cooling equipment. Here, the editor of Ju Caiyuan once again gives you a clear answer. No ventilation or cooling equipment is required, because the transparent screen itself does not generate much heat, and LEDs The flexible transparent screen itself is designed with light strips, which has a very good ventilation effect and can naturally dissipate heat.
